Canopii Bias-T 10M-6 GHz

Lees meer

• Antenna RF feed
• Connect the instrument to block the direct current when testing the module [The spectrum analyzer and signal source cannot be directly connected to direct current, so direct current is required.
• Volume: 4.5*3*1.4cm (without protruding SMA)
• Weight: 66g (including host + TYPE-C cable)
• Working frequency: 10M-6GHz
• Insertion loss: =1dB (refer to the measured S21 S11 curve for details)
• Normal working voltage of DC blocking: DC-250V [Nominal withstand voltage of DC blocking capacitor is 250V, using ATC brand, high frequency microwave low insertion loss capacitor
• Normal working voltage and current of feeding: =350mA [The feeding current is mainly related to the current limiting of the feeding inductance. The microwave radio frequency inductor currently used is 350mA; the maximum feeding voltage is 50V] Power is supplied through the TYPE-C interface
• Input and output impedance 50 ohms, input and output interface SMA (outer spiral inner hole-female)

Lees minder